Disk Druid's Buttons
These buttons control Disk Druid's actions. They are used to change the
attributes of a partition (for example the file system type and mount point) and
also to create RAID devices. Buttons on this screen are also used to accept the
changes you have made, or to exit Disk Druid. For further explanation, take a
look at each button in order:
New: Used to request a new partition. When selected, a dialog box appears
containing fields (such as the mount point and size fields) that must be filled in.
Edit: Used to modify attributes of the partition currently selected in the
Partitions section.
Selecting Edit opens a dialog box. Some or all of the fields can be edited,
depending on whether the partition information has already been written to disk.
You can also edit free space as represented in the graphical display to create a
new partition within that space. Either highlight the free space and then select
the Edit button, or double-click on the free space to edit it.
To make a RAID device, you must first create (or reuse existing) software
RAID partitions. Once you have created two or more software RAID partitions,
select Make RAID to join the software RAID partitions into a RAID device.
Delete: Used to remove the partition currently highlighted in the Current
Disk Partitions section. You will be asked to confirm the deletion of any
partition.
Reset: Used to restore Disk Druid to its original state. All changes made
will be lost if you Reset the partitions.
RAID: Used to provide redundancy to any or all disk partitions. It should
only be used if you have experience using RAID. To read more about RAID,
refer to the Red Hat Enterprise Linux Deployment Guide.
To make a RAID device, you must first create software RAID partitions. Once
you have created two or more software RAID partitions, select RAID to join the
software RAID partitions into a RAID device.
LVM: Allows you to create an LVM logical volume. The role of LVM
Logical Volume Manager) is to present a simple logical view of underlying
physical storage space, such as a hard drive(s). LVM manages individual
physical disks — or to be more precise, the individual partitions present on
them. It should only be used if you have experience using LVM. To read more
about LVM, refer to the Red Hat Enterprise Linux Deployment Guide. Note,
LVM is only available in the graphical installation program.
To create an LVM logical volume, you must first create partitions of type
physical volume (LVM). Once you have created one or more physical volume
LVM) partitions, select LVM to create an LVM logical volume.
These buttons control Disk Druid's actions. They are used to change the
attributes of a partition (for example the file system type and mount point) and
also to create RAID devices. Buttons on this screen are also used to accept the
changes you have made, or to exit Disk Druid. For further explanation, take a
look at each button in order:
New: Used to request a new partition. When selected, a dialog box appears
containing fields (such as the mount point and size fields) that must be filled in.
Edit: Used to modify attributes of the partition currently selected in the
Partitions section.
Selecting Edit opens a dialog box. Some or all of the fields can be edited,
depending on whether the partition information has already been written to disk.
You can also edit free space as represented in the graphical display to create a
new partition within that space. Either highlight the free space and then select
the Edit button, or double-click on the free space to edit it.
To make a RAID device, you must first create (or reuse existing) software
RAID partitions. Once you have created two or more software RAID partitions,
select Make RAID to join the software RAID partitions into a RAID device.
Delete: Used to remove the partition currently highlighted in the Current
Disk Partitions section. You will be asked to confirm the deletion of any
partition.
Reset: Used to restore Disk Druid to its original state. All changes made
will be lost if you Reset the partitions.
RAID: Used to provide redundancy to any or all disk partitions. It should
only be used if you have experience using RAID. To read more about RAID,
refer to the Red Hat Enterprise Linux Deployment Guide.
To make a RAID device, you must first create software RAID partitions. Once
you have created two or more software RAID partitions, select RAID to join the
software RAID partitions into a RAID device.
LVM: Allows you to create an LVM logical volume. The role of LVM
Logical Volume Manager) is to present a simple logical view of underlying
physical storage space, such as a hard drive(s). LVM manages individual
physical disks — or to be more precise, the individual partitions present on
them. It should only be used if you have experience using LVM. To read more
about LVM, refer to the Red Hat Enterprise Linux Deployment Guide. Note,
LVM is only available in the graphical installation program.
To create an LVM logical volume, you must first create partitions of type
physical volume (LVM). Once you have created one or more physical volume
LVM) partitions, select LVM to create an LVM logical volume.
